Author: arkimedeadv

Are you experiencing gate opener problems?

This comprehensive guide will walk you through the most common issues that can affect your automatic gate system and provide practical solutions you can implement right away.

Whether you’re dealing with power issues, remote malfunctions, or sensor problems, we’ll help you identify and resolve these problems efficiently, potentially saving you time and money on unnecessary service calls.

Gate opener problems

The swing gate opener is a great innovation that allows easy access to your driveway and your home. The automatic gate offers a high level of security and privacy not normally offered by other systems. High tech devices are used for running the automatic swing  gates such as remote devices, geared motors, switching and locking mechanism and many more.

In the course of operation, certain operational faults may occur and interfere with the automatic swinging gate opener operation. Let’s examine these common issues in detail.

Gate will not open

This may happen once in a while and you experience the swing gate is not opening. There are various reasons for this and the first place to check should be the power source.

One should check whether the power is out, the electric mains in your home and also check for any faults in the circuit breakers. You may also need to ensure all switches connected to the electric swing gate opener are working and have been switched on. If after checking all these and still no operation, then the remote control could have a problem.

Remote control

The easiest way to determine fault with remote control is when you operate the door manually and it works. You need to enter the  codes in the access panel as done on the remote.

If the remote control is malfunctioning, check batteries and you may also have a specialist to check the transmitter of the device.

Door hits the ground

This happens when the gate opens, it hits or scratches on the ground. This may occur in an upward sloping driveway or an uneven path for the door. It is important to do a driveway adjustment for the motorized swing gate to solve this kind of problem.

The swing gate opener can be raised on a higher pole also to allow for more clearance on the bottom edge. If possible,you can also have the door to swing in the opposite direction

Safety sensor operation problems

This refers to the door safety sensors not functioning normally when the swinging gate is opening or closing.

The dual swing gate opener has safety sensors that prompts the gate to immediately reverse when a vehicle is on top of the sensor,  so as not to harm or damage the vehicle or person. This is the same case for then sliding gate opener. It is always important to check and ensure the sensors are working as required.

Gate obstructions

When in a hurry and the gate won’t open up, this may be a complete nightmare. Before calling emergency service,  and paying heavily for the professionals, you may need to check for gate obstructions.

Modern automatic swing gates are well equipped with safety features that stop the gate from further motion when it encounters an obstruction. Nowadays the gates are fitted with IR lights similar to eyeballs that create an invisible trip wire mechanism located at the base of the gate. There could be an innocent obstruction on this invisible beam such as a fallen branch, a dog or toy left unintentionally. This will make the swing gate actuators not respond until the obstruction is removed.

Conclusion

By now, you should have a clear understanding of the main issues that can affect your automatic gate system and how to address them effectively.

While many problems can be resolved through these troubleshooting steps, some situations require professional expertise. Don’t risk damaging your gate system or compromising your security.

Contact us today for a thorough assessment and expert solutions. Our experienced technicians are ready to help you maintain your gate system’s optimal performance and ensure your peace of mind.

Automated doors have become increasingly popular and widespread in various installations such as factories, stores and private homes. These doors have outstanding advantages which include ;

– Value addition to the property since many people prefer automatic doors in hospitals, airports, hotels, residential estates, shopping malls, retail outlets.
– Various models and designs including swinging doors opener , automatic folding doors, sliding doors and rotating doors.
– Convenience: guests and customers will appreciate not having to deal with very heavy manual doors, especially those with children and carrying luggage
– Ease of use and maintenance
– Cost versus benefits; the doors are more economical to use and operate especially in terms of energy savings.
– Safety: they provide consistently safe protection to propert

Types of Automatic Doors and Operating Mechanisms

Models of automatic doors can be distinguished by the speed reducer mechanism they operate and the mode of opening each door uses. These include;

Sliding Doors

They operate through worm drives which for transmission uses the crown wheel, connected with a worm screw that engages the gears for reducing transmission speed. The drive is usually installed at the top of the door and transmits motion to attain a linear displacement.

Access gates

Similar to sliding doors operators  but the worm drives are located at the bottom of the gate. Motion is generated through pinion and motor gearing system and they also have linear motion.

Sectional Garage Doors

They have a linear speed reduction mechanism. The door position can be raised, lowered, adjusted or even tilted.
To derive maximum performance of your automatic door system, there are certain measures specific to these types of doors that need to be regularly done.

Gate automation was once considered a luxury feature in the home. However, currently it is considered an affordable and practical installation within the home and business premises as well. This may seem like a minor bother to some, but having to get out of the car when arriving home late at night or rushing out, can have a toll on your well being. The solution is very simple.

Automatic sliding gate opener systems are designed to allow you to open gate automatically without having to manually handle the gate. The opener systems are easy to install and very cost effective nowadays compared to the past. They can be remote controlled or operated through a switching mechanism.

Residential Sliding Gate Operators

These are specific designs of sliding gate openers for gates that open by sliding along a rail as opposed to gates that open by swinging.  Some of the advantages of sliding gates include;

• Compact installation that allows more room and space
• Good security deterrent and harder to force open
• Easy to fit into small spaces where there’s no room for outward and inward opening.
• Unaffected by wind factor as compared to swing gates
• Best for driveways with sharp turns
• Can be done on a slope or even the ground.
• The heavy duty sliding gate opener system is able to handle heavier loads.

Sliding Gate Motors

Sliding gate motors are used to drive the movement of the gate. The automatic system is customized in accordance to the size of a gate, weight of the gate and dimensions of the gate. They are also made to be able to withstand weather conditions all the time. The sliding gate motor is also designed to handle extensive usage, including usage in gate barriers and you are also able to control the size of passage depending on the kind of traffic moving in.

Automatic gate opener systems provide efficient and convenient access to your home, office or industrial facility. They also serve to add a layer of protection to the home or facility.

Design and Operating Principle of Sliding Gate

The sliding gate opener system is a combination of a mechanical system and an electrical system, whereby the mechanical system moves the gate and electrical system provides and controls the energy for this movement. No human energy is used to push or pull the gate. The gate operating system serves as the actuator section of the gate and provides the motion to open and close the gate. An auto gate motor is applied to provide the required kinetic energy.

Sliding Gate Motor Technology

The sliding gate motor is specially designed to open and close sliding and swing gates. The auto gate motors have programmable logic controls installed in the circuitry that entirely controls the opening and closing action of the motor. The Automatic gate motors may be entirely controlled through a remote control or may be manually activated through relay switch.

Components Involved in Sliding Gate Installation

Gear Box: this is a reduction drive mechanism used to shift the rotational speed. The gear box serves as a reduction drive where the rotational speed of the sliding gate electrical motor is reduced for increased torque to be achieved is increased. The sliding gate operator utilizes worm gearboxes technology that delivers high torque, smooth running and long lasting operation.

Sliding Gate Installation

The sliding gate opener consists of several features and these include;
The installation kit, this may include strong shaft and corresponding sprocket, cast metallic floor plate, push buttons, power supply and PLC controls. There may also be a customization features for directional change, speed alterations and pedestrian programmable features. Safety features also need to be included such as the emergency release switch; automatic power shut procedures and sensors that can stop a moving gate in case of obstruction and accidents. Manual release levers are also important in case of power failures and electrical faults.

Factors to Consider When Installing Sliding Gate Opener

• Select the Right Model : there are multiple models of gate openers available, both on the retail stores and automatic sliding gate opener suppliers online. Price considerations are just one among many considerations that should be done.
• Type of Gate: is it a swing or slide gate?  In the case of sliding gate, a chain system located at the bottom of the gate is installed. A sliding gate opener operator is then installed to assist in opening and closing the gate.
• Length of Gate: Applies to the sliding gate where the length of gate is important in determining the length of the chain, power requirements and attachments required.
• Weight of Gate: a suitable electric sliding automatic gate opener is needed that can handle the weight of the gate.  If not, the opener will either break or never function at all. It is therefore critical to have a qualified installer available and pay keen attention to information provided by the automatic gate suppliers concerning the load requirements.

Automatic bollards: an anti-terrorism solution, to protect at-risk sites and easily manage entrances / exits

Vehicle terrorism: how to fight it with security bollards

Guaranteeing maximum protection for public places is one of today’s priorities for urban security. Vehicle terrorism is particularly dangerous because it makes use of means that are available to everyone (cars, trucks and vans) and can affect a large number of people in a few minutes, especially in very crowded places. One of the most dramatic episodes of recent years was the Toronto attack in April 2018. During the attack, a man used a van as a ram and ran over pedestrians in the business district of North York City Center, killing 10 people and wounding 16 others, some critically.

How can these attacks be prevented? What are the most effective solutions?

There are three reasons why protecting at-risk cities is not always easy:

• It is necessary to limit access to vehicles without preventing access to tourists. Generally, the places in question are crowded and require wide passages so as not to inhibit the free movement of pedestrians.
• Often, they are spaces of artistic value that require discreet defensive solutions, without damaging the site’s beauty.
• Furthermore, the solutions must be functional and practical to install in a short time, while ensuring a high level of security.

Automatic bollards: an effective, immediate and versatile solution

The vast experience accumulated over the years has allowed QUIKO to develop solutions in line with market demand. To guarantee maximum safety and reliability in every context, QUIKO has designed CENTURION, a complete range of electric bollards. In addition to ensuring the protection of at-risk places, the range is also suitable for:

• Protecting places at risk from theft and robbery
• Easily managing entrance / exit to parking lots

Security bollards: fundamental characteristics for a high-end product

CENTURION is a range of automatic rising bollards with optimal features and multiple functions. High resistance in all weather conditions ensures maximum performance even in adverse weather.

Often such protection must be installed in places where decor and aesthetics are key, such as at the gates of historic city centres or near monuments and works of art. For this reason, the CENTURION range is designed to be very discreet and not excessively influence the environment where it is installed.

Rising bollards: safety at heart

Attention to detail is synonymous with 360° efficiency. The QUIKO installations are equipped with a high-intensity retro-reflective film with a crown of strong penetration lights to make them visible helping to avoid accidents.

Furthermore, in the event of a power failure, the system automatically drops. It is also possible to install a special optional kit composed of buffer batteries to avoid this happening.

Choosing a smart home: everything you need to know

The word domotics is now on everyone’s lips – the advantage of choosing a smart home is no longer new, but are we really sure that we know all the advantages that can be obtained from a smart home? A home automation system is a structural and functional system that allows different technologies and devices to be used by the user to switch on and manage the automation of home systems, even remotely, from automated sliding gate openers to automated swing gate openers to automatic barrier gates.

Thanks to remote control from pc, tablet or smartphone, it’s possible to automate many of the daily chores without risk of forgetting them and without the need to be physically present at home. It’s a choice that, according to international data, is becoming increasingly popular in people’s homes worldwide.

Most certainly, designing and building an automated home is an important investment while also being a greatly beneficial solution in many ways. Are you sure you know them all?

Smart home for energy and consumption saving

Saving is the first and greatest advantage that results from choosing home automation: cost saving but, first of all, consumption saving. A real advantage for your purse, but also an important show of respect for our surrounding environment – a reduced consumption allows smart homes to have a minimum environmental impact compared to a traditional home.

A smart home allows the energy stability of the electrical system to be obtained and maintained while finding a constant temperature that is fit for every room. The optimization of consumption combined with the possibility of remote management allows the waste of heat, electricity to be avoided and remarkably reduces the air emissions of your home.

Speaking about numbers, a domotics project has a smart control of the different sources of energy allowing for a saving from 20% to 30% in costs, in addition to optimizing the use of resources.

Smart home: 360° safety

Home automation, such as audio door entry systems, is a synonymous with safety. The smart home allows the system to directly interact with the specific alarms. Water leaks or floods, gas leaks, power shortages and electrical failures will no longer be a danger for you or your family. You may view all the alarm signals on your mobile device at the time of activation.

With a smart home, safety is also guaranteed by the connection to the anti-theft and CCTV system. Thanks to the automation of shutters and blinds, you make your home safer from attempted break-in and with the automation of sliding gate openers) and swing gate openers, you are sure that everything is always perfectly locked, when you come and when you go.

Choosing an automated home means ensuring that you and your loved ones are always safe, even when you’re not home. You can constantly keep your home under control easily from your smartphone, also when you’re at work, even you’re traveling.

Smart home and living comfort to enjoy the time you spend at home

Lifting the shutters and blinds, switching on the air conditioner or the heating system, programming the sprinkler system, managing appliance consumption, all easily from your smartphone or pc. What’s better than controlling your entire home without stress, lying on the couch, not having to get up and fetch controllers?

Opening the garage door finding home at the perfect temperature after a long and tiresome day at work, remotely programming how you want your home to be when you return.

GARAGE AUTOMATION

Syncro Kit is a cutting-edge solution to any garage door automation. Syncro Kit combines the refined technology of Quiko’s electronics with the power and reliability of Syncro series geared motors.

It is characterized by:

• Modern design
• Built-in safety anti-crush clutch
• Easy and fast setup

This device has a powerful motor that can handle medium dimensioned doors. The user can also choose to activate the automatic closing function: this feature is useful to automatically close the door in case it remains open by mistake.

Thanks to the easy manual release by cord it is also possible to open and close the door manually, in the event of a black out.

Garage automation: the innovative syncro kit

Quiko’s Syncro Kit features two different traction powers: QK-S60KIT (800N) and QK-S110KIT (1100N).

The kit includes a powerful gearmotor with mounting brackets, a control board with 433,92 MHz receiver and antenna, a 4 channel transmitter and a 3m chain operated transmission rail.

Syncro kit optionals

The Syncro kit features a complete and functional set of optionals:

• QK-CE24SYV – a 24V replacement control board with 433,92 MHz radioreceiver
• QK-SY3 – 3 metres of replacement iron rail
• QK-SEB – a kit for external unlocking
• QK-SYB – an oscillating arm for up-and-over doors
• QK-FTPO – a set of safety infrared photocells
• QK-LUX24 – a flashing lamp

Gate automation

Quiko introduces Scarabeo, a new series of gearmotors with articulated arm for swing gates. The maximum length of 2,5 meters per leaf and the easy installation are the main characteristics of this technology.

Moreover this series presents new features that make this product even more interesting and functional for the user:

• mechanical limit switches
• high visibility leds
• possibility to unlock from outside

In fact, the geared motor can also be easily unlocked from outside, in full safety, thanks to the specific optional accessory.

All of Scarabeo’s electronic features and functionalities comply with the European Normative concerning automation security.

Gate automation: discover the scarabeo kit

The Scarabeo kit is available in two different versions: QK-SCA230KIT, 230V ac max 2,5m (X2), and QK-SCA24KIT, 24V dc max 2,5m (X2).

This kit features:

• 2 gearmotors with articulated arms
• a control board with 433,92MHz receiver and antenna
• a 4 channel transmitter
• a set of Infrared Photocells
• a flashing lamp
• a key switch

Scarabeo kit optionals

The Scarabeo kit’s optionals offer many additional useful features:

• QK-CE220BATRL4 – 230V control board with 433,92MHz radioreceiver
• QK-CE24BATR – 24V control board with 433,92MHz radioreceiver
• QK-BPACK1 – 2 x 12V batteries
• QK-ELS – 12V vertical electrical lock
• QK-ARMO – armoured key switch with manual release system and pushbutton